Home/Roof Repairs/Tile Roof Repointing & Rebedding Lennox Head & Northern Rivers
Roofer applying flexible pointing compound to ridge capping on a tile roof in Ballina

Tile Roof Repointing & Rebedding Lennox Head & Northern Rivers

Tile roof repointing removes cracked pointing mortar and applies new flexible, colour-matched pointing compound to ridge and hip caps. Rebedding goes further — lifting the caps, replacing the bedding mortar, and re-setting them before pointing. On Northern Rivers tile homes, coastal UV and salt crack the old mortar and let water in around the ridges. Repointing or rebedding seals the roof and stops ridge leaks.

Signs you need this

  • Cracked, crumbling or missing mortar along ridge and hip caps
  • Ridge caps that are loose or have shifted
  • Mortar pieces collecting in the gutters
  • Leaks appearing near ridges or hips after rain
  • Gaps you can see daylight through at the ridges
  • Old rigid mortar that has shrunk away from the caps

What we do, step by step

  1. 1

    We inspect the roof and photograph the ridge and hip caps, valleys and flashings.

  2. 2

    Any broken or cracked tiles are replaced before we start on the ridges.

  3. 3

    Where the bedding is sound, we remove cracked pointing and apply new flexible pointing compound, colour-matched to your tiles.

  4. 4

    Where the bedding has crumbled or caps are loose, we lift the caps, lay fresh bedding mortar, re-set the caps, then point.

  5. 5

    We check and clean valleys and flashings while we're up there.

  6. 6

    You receive a before/after photo report showing the repointed ridges.

Materials we use — and why they suit coastal homes

We use flexible pointing compound (not rigid cement mortar) because it expands and contracts with temperature — critical on coastal roofs that bake in summer UV and flex in storms. It's colour-matched to your tiles for a clean finish. Where rebedding is needed, we use a solid bedding mortar to set the caps before the flexible pointing goes over the top.

How much does it cost?

from $2,000 – every roof is quoted after inspection

The total depends on the extent of ridge and hip, whether rebedding is needed, the number of broken tiles, roof pitch and access. We give you an itemised quote after inspection.

Repair, restore or replace?

If the bedding is solid and only the pointing is cracked, repointing alone is enough. If the caps are loose or the bedding has crumbled, rebedding is the proper fix — repointing over failed bedding won't last. If most tiles and ridges are failing and the roof is 30+ years old, a full restoration or re-roof may be better value. We'll show you photos and an honest recommendation.

Before & after

Before and after roof repair — after
Before and after roof repair — before
BEFORE
AFTER
Ridge cap repointing & rebedding — Alstonville — after
Ridge cap repointing & rebedding — Alstonville — before
BEFORE
AFTER

Ridge cap repointing & rebedding — Alstonville

Get a quick quote for this job

Free, no-obligation quote

A few details and we'll call you back with a price — no obligation.

By submitting you agree to be contacted about your request.

Frequently asked questions

Repointing removes cracked old pointing mortar and applies new flexible pointing compound over the ridge and hip caps. Rebedding goes deeper — the ridge caps are lifted, the old bedding mortar removed, a fresh bedding mortar laid, and the caps re-set before pointing. Rebedding is needed when the caps are loose or the bedding itself has crumbled; repointing alone is fine when the bedding is still solid.